Power Management ICs

Battery Protection IC for 3-serial to 5-serial Cell Pack (Secondary Protection) S-82P5B Series

This IC is used for secondary protection of lithium-ion rechargeable batteries, which includes high-accuracy voltage detection circuits and delay circuits.
Short-circuiting between cells makes it possible for serial connection of three cells to five cells.

Features

High-accuracy voltage detection circuit for each cell
Overcharge detection voltage n (n = 1 to 5)
2.700 V to 4.700 V (5 mV step)
: Accuracy ±15 mV (Ta = +25°C)
: Accuracy ±20 mV (Ta = -10°C to +60°C)
Overcharge release voltage n (n = 1 to 5)*1
2.700 V to 4.700 V
: Accuracy ±50 mV (Ta = +25°C)
Overcharge detection delay times are generated only by an internal circuit (external capacitors are unnecessary)
Overcharge detection delay time: 0.5 s, 1 s, 2 s, 4 s, 6 s, 8 s
Output form
CMOS output, Nch open-drain output
Output logic
Active "H", active "L"
Built-in test mode function to check overcharge detection voltage with shortened delay time
High-withstand voltage
Absolute maximum rating 28 V
Wide operation voltage range
3.6 V to 26 V
Wide operation temperature range
Ta = -40°C to +85°C
Low current consumption
During operation: 1.2 μA typ., 2.4 μA max. (Ta = +25°C)
Lead-free (Sn 100%), halogen-free

*1. Overcharge release voltage = Overcharge detection voltage + Overcharge hysteresis voltage
(Overcharge hysteresis voltage can be selected from a range of 0 mV to -400 mV in 50 mV step.)

Applications

  • Lithium-ion rechargeable battery pack

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.