This IC is a monitoring IC for automotive rechargeable batteries, which includes high-accuracy voltage detection circuits and delay circuits. Switching control for 3-serial to 6-serial cell is possible by inputting voltage to the SEL1 pin and the SEL2 pin. By cascade connection, it is possible to protect 7-serial or more cells lithium-ion rechargeable battery pack. In addition, this IC can perform a self-test to confirm overcharge and overdischarge detection operations.
Features
- High-accuracy voltage detection circuit for each cell
- Overcharge detection voltage n: 2.500 V to 4.500 V (25 mV step)
Accuracy ±20 mV (Ta = +25°C)
Accuracy ±30 mV (Ta = -5°C to +55°C) - Overcharge release voltage n: 2.300 V to 4.500 V*1
Accuracy ±50 mV - Overdischarge detection voltage n: 1.000 V to 3.000 V (100 mV step)*2
Accuracy ±80 mV - Overdischarge release voltage n: 1.000 V to 3.300 V*3
Accuracy ±100 mV - Self-test results to confirm overcharge and overdischarge detection operations can be output from the OUT1 pin and the OUT2 pin.
- Cascade connection function:
- Battery voltage monitoring of multiple modules is possible by connecting the upper module output to the CASI1 pin and the CASI2 pin.
- Each delay time is settable by an internal circuit only (External capacitors are not necessary).*4
- Detection delay time: 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms, 128 ms, 256 ms
- Release delay time: 0.25 ms, 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms
- Switching control for 3-serial to 6-serial cell is possible by inputting voltage to the SEL1 pin and the SEL2 pin.
- Two detection signal types
- Common:
OUT1 pin: Overcharge and overdischarge detection signal
OUT2 pin: Overcharge detection signal - Separate:
OUT1 pin: Overcharge detection signal
OUT2 pin: Overdischarge detection signal - OUT1 pin, OUT2 pin output form
- CMOS output
- OUT1 pin, OUT2 pin output logic
- Active "H"
- High-withstand voltage
- Absolute maximum rating 28.0 V
- Wide operation voltage range
- 4.8 V to 28.0 V
- Wide operation temperature range
- Ta = -40°C to +125°C
- Low current consumption
- During operation: 20 μA max. (Ta = +25°C)
- Lead-free (Sn 100%), halogen-free
- AEC-Q100 in process*5
- This IC has been developed for the battery management system in accordance with ISO 26262.
ABLIC Inc. can provide a safety manual for this IC.*5, *6
*1. Overcharge release voltage = Overcharge detection voltage − Overcharge hysteresis voltage
(Overcharge hysteresis voltage n is selectable from 0 V to 400 mV in 50 mV step.) *2. When this IC is used for monitoring a 3-serial-cell battery, set the overdischarge detection voltage n to 1.6 V or higher. *3. Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis voltage
(Overdischarge hysteresis voltage n is selectable from 0 V to 0.7 V in 100 mV step.) *4. Set the delay time to detection delay time > release delay time. *5. Contact our sales representatives for details. *6. A Non-Disclosure Agreement is necessary when providing the documents.
Remark n = 1 to 6
Application
- Automotive rechargeable battery pack (EV, HEV, PHEV, etc.)