Block Circuit ｜ Recommended Products
When setting up 1-cell battery protection circuits, do you encounter any of the following issues?
ABLIC introduces 1-cell battery protection circuits that meet your specific requirements without these common issues.
Specific Requirements:
- Configured a protection circuit that uses secondary protection to cut off the charging path completely.
- Able to protect both overcharge and overcurrent using secondary protection.
- Complied with UL62368 standard (LPS test).
Block Circuit:
Secondary Protection Circuit Using a Protection Fuse
Even if a failure occurs in the IC or components of the primary protection circuit, it is possible to cut off the current path with the protector fuse.
By using a product with an overcurrent detection function, a safer circuit configuration is possible.
Recommended Products for This Protection Circuit
Featuring Secondary Protection with High-accuracy Overcharge Detection and Discharge Overcurrent Detection
| Product name | Datasheet | Features | Buy Online | |
|---|---|---|---|---|
| S-8216A | Overcharge detection voltage accuracy | ±15mV |     |
|
| Discharge overcurrent detection voltage accuracy | ±1.5mV | |||
| S-8206A | Overcharge detection voltage accuracy | ±20mV | |
|
| Discharge overcurrent detection function | Unavailable | |||
Application-specific Circuit Examples of Battery Protection ICs for 1-cell Pack
ABLIC's Battery Protection ICs for 1-cell Pack
Go to Introduction of Battery Protection ICs for 1-cell Pack
