Standard Circuit Example

TO-252-9S (VA009-A)

HSOP-8A (FH008-A)

Output current : 500 mA (S-19318) ｜ 250 mA (S-19317)

This IC is a high-withstand voltage and low dropout positive voltage regulator with a reset function and has a built-in ON / OFF circuit, developed using high-withstand voltage CMOS process technology.
This IC operates at the maximum operation voltage of 36 V and a low current consumption of 3.0 μA typ. A built-in overcurrent protection circuit to limit overcurrent of the output transistor and a built-in thermal shutdown circuit to limit heat are included. Regarding a release signal output in the reset function, this IC enables delay time adjustment by an external capacitor.

Features

Regulator block

Output voltage: 3.3 V, 5.0 V
Input voltage: 3.0 V to 36.0 V
Output voltage accuracy: ±2.0% (T_j = -40°C to +150°C)
Dropout voltage: 100 mV typ. (5.0V output product, I_OUT = 100mA)
Output current: Possible to output 250 mA (V_IN = V_OUT(S) + 1.0 V)^*1
Input and output capacitors: A ceramic capacitor of 1.0 µF or more can be used.
Built-in overcurrent protection circuit: Limits overcurrent of output transistor.
Built-in thermal shutdown circuit: Detection temperature 170°C typ.
Built-in ON / OFF circuit: Ensures long battery life.

Detector block

Detection voltage: 2.6 V to 4.7 V, selectable in 0.1 V step
Detection voltage accuracy: ±2.0% (T_j = -40°C to +150°C)
Hysteresis width: 0.12 V min.
Release delay time is adjustable^*2: 20 ms typ. (C_DLY = 10 nF)

Overall

Current consumption: 3.0 μA typ. (During regulator operation)
0.1 μA typ. (During regulator stop)
Operation temperature range: Ta = -40°C to +125°C
Lead-free (Sn 100%), halogen-free
Withstand 45 V load dump
AEC-Q100 qualified^*3

*1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.
*2. The release delay time can be adjusted by connecting C_DLY to the DLY pin.
*3. Contact our sales representatives for details.

Applications

Constant-voltage power supply and reset circuit for automotive electric component

Parts List

U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
These descriptions may be different from the actual product name and parameter.
Please confirm the product name and specifications with the data sheet again.
The information herein is subject to change without notice.

Automotive, 125°C Operation, 36 V Input, 250 mA, Voltage Regulator with Reset Function S-19317 Series

Related articles