Automotive ICs

125°C Operation SPI Serial EEPROM for Automotive S-25A010A/020A/040A (1K/2K/4K-bit)

This IC is a SPI serial EEPROM which operates under the high temperature, at high speed, with the wide range operation for automotive components. This IC has the capacity of 1 K-bit, 2 K-bit, 4 K-bit and the organization of 128 words x 8-bit, 256 words x 8-bit, 512 words x 8-bit. Page write and Sequential read are available.

Caution: Before using the product in automobile control unit or medical equipment, it is imperative to contact our sales representatives.

Features

Operating voltage range
Read: 2.5 V to 5.5 V
Write: 2.5 V to 5.5 V
Operation frequency
6.5 MHz max.
Write time
4.0 ms max.
SPI mode (0, 0) and (1, 1)
Page Write
16 bytes / page
Sequential read
Write protect
Software, Hardware
Protect area: 25%, 50%, 100%
Monitors Write to the memory by a status register
Function to prevent malfunction by monitoring clock pulse
Write protect function during the low power supply
CMOS schmitt input
(CS , SCK, SI, WP , HOLD )
Endurance
106cycles/word*1 (Ta =+25℃)
5 × 105cycle / word*1 (Ta =+125℃)
Data retention
100 years (Ta =+25℃)
50 years (Ta =+125℃)
Memory capacitance
S-25A010A: 1 Kbit
S-25A020A: 2 Kbit
S-25A040A: 4 Kbit
Initial delivery state
FFh, BP1 = 0, BP0 = 0
Burn-in specification
Wafer level burn-in
Operation temperature range
Ta = −40°C to +105°C 
Lead-free(Sn 100%), halogen-free
AEC-Q100 qualified*2 

*1. For each address (Word: 8 bits)
*2. Contact our sales representatives for details.

Parts List

  • U(Ux), S and G at the end of the product name of ABLIC Inc. were used to indicate different material specifications as “environmental code”,
    however, these have now been unified into “lead-free and halogen-free” and are identical in terms of environmental quality.
  • Note: Lead-free plating other than 100% Sn is applied to some limited old products, therefore, please contact our sales representatives for details.
  • These descriptions may be different from the actual product name and parameter.
    Please confirm the product name and specifications with the data sheet again.
  • The information herein is subject to change without notice.